Heavy timber framing at the Bullitt Center

Photo by John Stamets

When the Bullitt Foundation began work on the Bullitt Center, Denis Hayes, the foundation's president and CEO, had a clear vision that the architecture should be regionally relevant. Noting that buildings in Seattle and Phoenix are too frequently designed in the same ways, Hayes set out to promote the idea of a "regional vernacular" in architecture that draws on the environment surrounding Seattle for guidance. And in the Pacific Northwest, there is no environmental feature more prominent than forests, making wood a logical building material.

Add in the fact that when it comes from a responsibly managed forest, wood is among the most environmentally friendly building materials, and it is only natural that the Bullitt Center is a heavy-timber framed structure.

As the first commercial building to pursue the Living Building Challenge, the Bullitt Center team is working hard to meet all 20 "imperatives," as the requirements are known. Included in this list is an imperative focused on "Responsible Industry," requiring that "all wood must be certified by the Forest Stewardship Council (FSC)" or from salvaged sources.

With construction well under way, wood framing for the Bullitt Center has begun.

And anyone who has passed the job site on 15th & Madison has likely noticed the glued, laminated timbers, or "glulams" as they are known in the industry. Manufactured by Calvert Glulams in Vancouver, Wash., the glulams offer several environmental benefits, in addition to being stronger than traditional sawn timbers. First, they are from forests certified to the standards set by the Forest Stewardship Council, which is widely recognized to be the most rigorous and prescriptive benchmark for forest management globally. All wood for the project comes from within a 1,000-kilometer radius, as required by the Living Building Challenge. In the case of the glulams, the wood came from FSC-certified Douglas fir forests in Idaho, so the project is helping support a regional economy for wood from responsibly managed forests. And because the glulams are manufactured by combining smaller dimensional lumber, they reduce pressure to harvest larger, older trees that historically were needed to mill large dimension timbers.

Brian Court from Miller Hull Partnership addresses some of the other design considerations for heavy timber framing on the Bullitt Center blog.

Over the next few weeks, expect to see the Bullitt Center take its full form, as the six stories rise from the construction site. The project is on track to be completed later this year.

Share this: